Centrifugal Pumps
HAZARDS OF VERTICALLY MOUNTING
CENTRIFUGAL PUMPS
Tom Schroeder
Mounting centrifugal pumps in a vertical configuration certainly has its benefits.
It can provide a much smaller footprint, and it makes sense for inline pumping applications.
But before running a centrifugal pump vertically, it is important to review the environment that the seal will see.
Fluids with high amounts of dissolved gases or entrained air can cause serious problems for vertically mounted centrifugal pumps.
Air bubbles in the fluid tend to rise and could accumulate in pump's stuffing box area depending on pump design and process conditions.
This will prevent fluid properly lubricating the mechanical seal, running it dry.
Mechanical seals need a small amount of fluid between the seal faces to operate properly.
The fluid vaporizes creating a barrier between the faces and reduces friction between the faces.
The fluid is also needed to help dissipate heat created by the seal faces.
Without it, mechanical seals can experience thermal shock, coking, heat checking, and blistering of the seal face.
That doesn't mean mounting in this configuration is impossible.
Venting / Flush Plan
To ensure the mechanical seal does not run dry, consideration should be taken for air that is potentially in the stuffing box.
During selection of a pump it is important to speak with an engineer, who knows pumps and mechanical seals, for a recommendation on the proper venting and flush plan for your application.
A venting procedure at start-up could be as simple as opening a valve on a line coming of the stuffing box area to give a low pressure area for it to go.
Another option is a permanent line that allows for movement of any accumulated air and process fluid in this area.
A common flush plan for this application is API Plan 13.
This flush plan recirculates product from the seal chamber back to the pump suction.
This creates a pressure differential that promotes circulation and the evacuation of air through the process fluid.
Here's a good illustration of how the plan works:
In vertical mounting applications, it is important to provide an environment for that seal that will provide a long life and reduce downtime.
If you’re unsure, be sure to contact an engineer who understands the complications that can come with this configuration.
Need help? Ask us about it! We gladly provide technical assistance to businesses and municipalities in Wisconsin and upper Michigan.
Tom Schroeder is an Application Engineer II at Crane Engineering. He has more than 7 years of experience in the general industry sector. He specializes in the proper selection of fluid processing equipment like pumps, filters, mechanical seals, and mixers.
https://blog.craneengineering.net/hazards-of-vertically-mounting-centrifugal-pumps
RELATED POSTS:
RELATED POSTS:
CLICK HERE . . .
CLICK HERE . . .
CLICK HERE . . .
CLICK HERE . . .
CLICK HERE . . .
CLICK HERE . . .
.
Multi-Media Filter, Highly-Activated Carbon Filter,
Zeolite-Process Water Softener With Brine Tank,
Fiberglass Ballast-Type Pressure Tank
(fully automatic backwash & regeneration)
PURICARE
Systems
...
 |
| Multi-Media Filter, Highly-Activated Carbon Filter, Zeolite-Process Water Softener With Brine Tank, Fiberglass Ballast-Type Pressure Tank (fully automatic backwash & regeneration) |
PURICARE
Water
Treatment
Systems
.
...
...
Aganan, Pavia, Iloilo, Philippines
...
CLICK HERE . . . to view company profile . . .
Aganan, Pavia, Iloilo, Philippines
...
CLICK HERE . . . to view company profile . . .
CLICK HERE . . . to view company profile . . .
 |
| Ballast-TypePressure Tank |
 |
| Houston Water Pump with Mazaki Automatic Pump Controller |
No comments:
Post a Comment